85 CNC machines in our own plants. Milling, turning, EDM, grinding, sheet metal and bolt production under one management. Exporting to Japan, the United States, the EU and Australia.
CNC milling, CNC turning, EDM & wire cutting, grinding & tool grinding, sheet metal & welding, bolts & fasteners.
FANUC RoboDrill tapping centres plus vertical machining centres from Doosan, Haas and Hision. 3, 4 and 5-axis. Complex geometries, thin-wall parts, prototype through batch production.
Typical tolerance ±0.01 mm · 5-axis available
Mori Seiki and Okuma lathes up to Ø 310 × 800 mm, including twin-spindle. Concentricity and roundness held under continuous in-process check.
Typical tolerance ±0.005 mm
Sodick wire-cut plus Sodick die-sink EDM for fine features, sharp internal corners and tight radii. Hardened steel and tool steel capable.
Best tolerance ±0.003 mm
Surface and NC grinding for hardened components, flat and parallel faces and precision seats, to 500 × 200 × 250 mm.
Typical tolerance ±0.005 mm
Welding and finishing for enclosures, frames and structural assemblies. Currently exported to Australia.
Send the flat pattern or the folded model — we will confirm what we can form in-house
Bolts and fasteners for motorcycle and automotive use, including rolled thread for load-bearing parts.
Metric threads, rolled or cut to the drawing — send the part print for the size you need
85 CNC machines on our Ho Chi Minh City floor. Below is every make and model with its work envelope — check your part against it before you send a drawing, and ask us if what you need is not here.
| Make / Model | Type | Work envelope X × Y × Z (mm) | Origin |
|---|---|---|---|
| Machining centres — 3 / 4 / 5-axis | |||
| FANUC RoboDrill α-D21MiB | 3-axis tapping centre | 700 × 400 × 330 | Japan |
| FANUC RoboDrill α-D21LiB5 | 4-axis tapping centre | 700 × 400 × 330 + 4th | Japan |
| FANUC RoboDrill α-D21MiB5 | 5-axis tapping centre | 500 × 400 × 330 + 4/5th | Japan |
| DOOSAN DNM 650P II | Vertical machining centre | 1,300 × 670 × 625 | Korea |
| HISION VMC1000II | Vertical machining centre | 1,000 × 600 × 600 | China |
| HISION VMC850II | Vertical machining centre | 850 × 500 × 500 | China |
| HAAS VF-2SS | Vertical machining centre | 762 × 406 × 508 | USA |
| Turning | |||
| MORI SEIKI SL-153 / NL | CNC lathe | Ø 250 × 450 | Japan |
| OKUMA LB3000 EX | CNC lathe | Ø 310 × 800 | Japan |
| OKUMA LB15 | CNC lathe | hành trình? | Japan |
| OKUMA 2SP150H | Twin-spindle CNC lathe | hành trình? | Japan |
| Grinding | |||
| OKAMOTO PSG-52DX | Surface grinder | 500 × 200 × 250 | Japan |
| CHEVALIER FSG-2A818 | NC grinder | 450 × 200 × 250 | Taiwan |
| EDM & laser | |||
| SODICK AG40L | Die-sink EDM | 400 × 300 × 300 | Japan |
| SODICK AQ537L | Wire-cut EDM | 500 × 370 × 310 | Japan |
| DK7750 Moly Wire | Wire-cut EDM | 630 × 500 × 400 | China |
| MJ-300W Fiber Laser | Laser welding | Ø 200 × 250 | China |
Inspection runs in a climate-controlled lab against a calibrated reference standard, and every report we issue carries both inch and millimetre values so US prints need no re-reading.
Reading a foreign drawing? Aluminium grade equivalents — JIS, ASTM, GB and EN →
Not an exhaustive list. These are the grades we run most often. Send the grade your drawing calls for and we will confirm availability, lead time and the certificate we can supply with it.
Material certificates. Mill test certificates to EN 10204 3.1 are available on request. We do not substitute a grade — not even an equivalent one — without your written approval.
Anodizing in Type II and Type III, plus black oxide, run in our own shop. Zinc and nickel plating, thin dense chrome, PVD, powder coating and every heat treatment condition — quench and temper, carburizing, induction hardening, precipitation hardening — run through qualified partners under our inspection.
Ground support tooling and tooling assemblies. Non flight-critical parts.
Replacement parts, custom jigs and fixtures, OEM sub-assemblies.
Non-implant surgical instruments, dental and lab tooling in 316L and titanium.
Fasteners, bolts and bearing jigs for East Asian and Vietnamese assembly lines.
Electrical cabinet components and small automation machine parts.
Optical mounts and audio equipment chassis.
Machined components for the Vietnamese oil and gas sector.
Mould components in hardened tool steel, wire EDM and ground to size.
Precision components for European cargo bike manufacturing.
Photographed on our own floors — no stock imagery.
Incoming material verified against the mill test certificate before it reaches a machine.
The first part off a new setup is fully measured and approved before the batch runs.
Patrol inspection during the run, with frequency set by tolerance and batch size.
Final inspection to an agreed sampling plan before packing.
Non-conformance is reported with the drawing dimension, the allowable range, the actual measured value, the direction and size of the deviation, and the affected quantity — in both inch and millimetre. You get the numbers, not an apology, and you decide whether to accept, rework or reject.
Not marketing lines. These are clauses in the framework agreement we sign with every customer.
When the 2D drawing and the STEP file disagree, we machine to the print and tell you about the conflict the same day. We never quietly pick one.
If a specified grade or finish is unavailable, we propose an alternative and wait. Nothing enters production on a verbal yes.
Our floor works in millimetres. Conversion is documented and checked, and every inspection report shows both units side by side.
Drawing numbers, PO numbers and customer marks are kept off every image.
Manifold blocks 
Threaded shaft 
Mould insert 
Machined flange 
Turned pulleys 
Knurled rings 
Sheet metal enclosure 
Brass bushings 
Valve housing 
Finned housing 
Nozzle cone 
Slotted ring 
Slide blocks 
Steel sleeves 
Profile blocks 
Turned cone · CMM One piece. We are a job shop built for high-mix, low-volume work, so a single prototype and a 5,000-piece batch go through the same quoting process.
Typical milling ±0.01 mm, turning ±0.005 mm, grinding ±0.005 mm and wire EDM to ±0.003 mm. Anything tighter, send the print and we will tell you honestly whether we can hold it.
Within 24 business hours. Standard lead time after PO is 14 days, adjusted for finishing and quantity.
Yes. Far East High Tech holds ISO 9001:2015 issued by URS (United Registrar of Systems), certificate 140555/A/0001/UK/En, valid 15 February 2025 to 14 February 2028, under UKAS accreditation. The scope covers processing and trading of precision mechanical parts in aluminium, steel and stainless steel.
Japan, South Korea, the United States, Germany, Bulgaria, the Netherlands, Denmark and Australia.
Material test certificates to EN 10204 3.1, dimensional inspection reports in both inch and millimetre, and first article reports on request. Certificate of conformance is available on request.
Black oxide and anodizing are handled in-house. Zinc plating in clear, yellow and black chromate, zinc-nickel, electroless nickel, thin dense chrome, PVD and powder coating are run through qualified partners under our inspection.
Raw bar to packed carton happens inside our own plants. You deal with one company from quotation to shipment — there is no brokered sub-tier you cannot see.
Our shop floor works in millimetres, and conversion is documented and verified rather than assumed. US prints do not get reinterpreted here.
Japanese customers set the tolerance discipline, the documentation habits and the packing standards the whole factory now runs on. Everyone else gets the same treatment.
The 2D print governs over the STEP file, and no material substitution reaches production without your written approval. Both are contract clauses, not promises.
You always know which step your order is on, and who to ask about it.
Drawings and specs reviewed by an engineer, not a sales inbox.
Feasibility and price back within 24 business hours.
PO accepted, schedule locked, materials released.
First article approved before the batch runs.
CMM, optical and visual checks against the print.
VCI or ESD protection, labelled to your specification.
Dispatch by air or sea with documents attached.
STEP / IGES + 2D PDF · Material grade · Quantity · Tolerance · Finish
Or write to qlcl@fe2tech.com · Call +84 707 733 399
Send what you have. If the print is missing something we need, we will ask a specific question rather than guess.